How to Level an Above Ground Pool with Water in It: A Comprehensive Guide

Swimming pools are not only fun and exciting, but they also boost aesthetics and home value. Nothing is as refreshing as diving into a swimming pool on a hot afternoon. Some homeowners avoid the limitations of an in-ground swimming pool and go for an above-ground swimming pool. An in-ground pool consists of a basin dug in the ground, whereas an above-ground swimming pool is typically a basin installed on the ground. In some instances, an above-ground swimming pool might have a foundation, and in other instances, it may be self-sufficient. If you have an above-ground swimming pool and experience certain challenges, you can contact All About Pools. Our experienced swimming pool contractors will help you.

Leveling an Above Ground Swimming Pool

When you climb into an above-ground swimming pool and realize that the water is unequal on different ends, it can be frustrating. The one thing usually behind uneven water levels in a swimming pool is the rough ground that the pool rests upon. The general method of correcting this mistake is by dismantling the swimming pool and making the ground even. But then, this process is resource-intensive. The following steps are critical at equalizing the water levels of an above-ground swimming pool. But if you need professional help from expert austin pool builders, just click the given link.

1. Remove Some Water

If you attempted to fix the ground without getting rid of some water, things would be heavy and complex, and there’d be a lot of splashing of water, which might lead to loss of valuable resources. And so, the first and most important step is emptying the basin halfway full.

2. Eliminate the Blocks

During an above-ground swimming pool installation, blocks are usually placed underneath the slab to make the base even. But these blocks are commonly responsible for the bumpy exterior of the base. And so, to correct this problem, the first thing that needs to be done is to eliminate the blocks.

3. Lift the Slab

To make the water levels in your pool even, you need to install new blocks beneath the slab. You’ll need certain equipment to lift the slab. For instance, if you have a shovel, you can place its tip beneath the slab and push down the handle until the slab is arched up.

4. Install New Blocks

Replacing the blocks is essential for acquiring an even base. As you hold the slab open, you can have someone else install new blocks. A hammer may be used to ensure that the blocks are fixed in the best position. Perform the same process for all sets to level the pool’s base.

5. Put Soil

When you’re done installing the blocks, you’ll notice some hollowness at the point where the shovel had been used to elevate the slab. If the cavity is ignored, it can eventually cause damage. This cavity is typically sealed off with soil.

6. Use the Pool

Once you’re done replacing the blocks and sealing the cavity, your above-ground swimming pool is now sitting on a smooth surface, and so, the water levels become even. Since your swimming pool is now halfway full, you can add more water and make it full. And now your swimming pool is ready to be used again.

Best Materials for Leveling an Above-Ground Swimming Pool

The following are some of the materials that are typically used for leveling an above-ground swimming pool:

  • Sand: sand not only makes for quick leveling but is also an affordable option. All you have to do is put the sand in the base and shape it into a smooth surface. On the downside, sand particles are loosely packed, and so they can encourage pests to crawl up under the swimming pool and start causing structural damage.
  • Concrete: you can achieve a smooth and stable surface by using concrete. The major benefit of concrete is its strength, and so, even when the swimming pool is used by a lot of people, concrete, unlike various materials, still maintains form.
  • Solid Foam: it’s ideal for leveling an above-ground swimming pool without any digging. Additionally, the solid foam has protective properties, as it safeguards the base of the swimming pool from the concrete. The material is flexible and can take varying shapes. On the downside, using solid foam can be quite expensive.
  • Crushed Stone: this substance can also be used to establish a smooth platform for an above-ground swimming pool to be installed. To achieve quality results, the stones need to be crushed properly, or else the swimming pool will develop structural faults later.