Your Guide to Hardwood Floor Damage Repair

Hardwood flooring, especially engineered hardwood flooring, looks fantastic, but if there’s visible damage, its appeal takes a hit. Plus, it’s not immediately obvious how to fix it. The good news is hardwood flooring companies are often expert at repair as well as new installation and replacement. You just need to plan your approach specific to the type of flooring you have. Not everyone knows that there are a few different options for hardwood flooring that define the ideal approach.

Types of Hardwood Flooring

There are three main cuts of hardwood flooring: strip, plank, and parquet. Strip flooring is the thinnest and most common type. Plank flooring is thicker than strip flooring and has a more rustic look. Parquet flooring is made of small wooden squares or rectangles which are glued together in a pattern.

If your hardwood floors are damaged, you can either repair them yourself or hire a professional to do the job for you. If you choose to do the repairs yourself, you’ll need to purchase some basic supplies, including wood filler, putty knife, sandpaper, polyurethane sealant/varnish, paintbrush, and cloths for dusting – and some knowledge on how the flooring is laid down. Knowing the cut of the wood really helps with a plan of attack.

Deciding on Hardwood Floor Repair Techniques

Destruction of Parquet in Apartment

There are different ways to do Hardwood Floor Damage Repair, depending on the type of hardwood flooring. Engineered hardwood flooring is more durable and can tolerate more foot traffic than traditional solid hardwood flooring. If you have a scratch or dent in your engineered hardwood floor, you can try to repair it yourself using a touch-up kit.

For traditional solid hardwood flooring, if you have a small scratch or dent, you can try to repair it with a wood filler. If the damage is more extensive, you may need to refinish the entire floor.

Engineered Vs Solid Wood Hardwood Planks

If your hardwood floors are scratched, dented, or gouged, you can fix them yourself using a few simple methods.

The first step is to identify the type of flooring you have. Each type of flooring requires a different repair method. Hardwood floors can be either solid or engineered. Solid hardwood floors are made from a single piece of wood, while engineered hardwood floors are made from multiple pieces of wood that are fused together.

Once you’ve identified the type of flooring, you’re ready to take the most reliable approach, sand and refinish. This method is the best option for solid hardwood floors that have deep scratches or gouges.

How to Refinish Your Floor

Refinishing usually involves sanding down the existing finish until the wood is exposed, then applying a new finish. Before refinishing your floor, you need to determine the type of wood that makes up the flooring you have. Three of the most common types of hardwood flooring are oak, pine, and birch.

Oak is a very durable type of wood and can be refinished multiple times before it needs to be replaced. Pine is a softer wood and should only be refinished once or twice. Birch is a good compromise between oak and pine and can be refinished three or four times.

Once you’ve determined the species of wood flooring you have, you need to decide whether to refinish it yourself or hire a professional. If you choose to do it yourself, make sure you read the instructions carefully and use the right products. If you damage it too much, you might need a flooring replacement which costs a lot more!

How to Use Wood Stain & Sealant

There are a few ways to refinish your floor, but the most common is to use a wood stain and sealer. You can find these products at most home improvement stores.

The first step is to clean the floor. Then, you’ll need to decide on the colour of stain you want. Once you’ve chosen a colour, apply it in a thin coat with a brush or cloth. Let it dry for 24 hours, then apply another coat. Once the stain is dry, apply a sealer. Let it dry for 24 hours before walking on it.

Engineered hardwood has some of the best qualities, and the repair process is pretty reasonable. All it takes is some effort to narrow down the best approach according to the type of material you’re dealing with. You can use wood stain and sealant to great effect in some cases, and before long, you’ll have hardwood floors that look new and are ready to withstand some punishment. Of course, your local flooring and carpet installation company might even be able to help! Best of luck!